See how EuroBeam could save you time and money!
EuroBeam's options include steel, timber and RC beam design and checking, steel and timber column checking, simple (non-moment) steel connections and checking of splices and beam web openings in steel I-beam sections.
The key limitations of this demo version is that printing is disabled and the steel section library only contains a limited selection of sections - virtually everything else is identical to the full version.
EuroBeam runs on Windows 7/8/10 systems. Windows XP and Vista are no longer supported.
Click here to download the demo (approx 10MB) (last update 29 Sept 2021)
The full version of EuroBeam comes with a 141 page printed manual. The manual is also available separately through the Lulu print-on-demand service, £10.95+P&P. more info - allow 7-10 days for delivery. Please do NOT send orders for manuals to us as we cannot handle them.
Clicking on the link or Download Now button above will either run the installation program immediately or will let you download it to your computer from where you can run it. The filename is EuroBeamDemoSetup.exe.
Once you have installed the program, start it (Start Menu, Programs, Greentram, EuroBeam). Click on 'OK' to clear the disclaimer screen. A project file called DEFAULT. The display should look something like the one shown below.
A EuroBeam project consists of one or more 'items'. An 'item' is a beam, steel column, timber post or stud, text page or OLE page. You can add items to your project by using the toolbar buttons or from the Project menu. You can edit items by double clicking on the window, clicking on the Edit button on the toolbar, selecting 'Edit' from the menu or by pressing Alt+E - one of these should suit your preferred way of working.
Starting a new project
To start a new project, select File, New. The Project details dialog will be displayed; this lets you enter data in four fields as with our other programs. You also choose which equation is used when factoring loads. Once you have entered the required information (you can go back and change it later if necessary) you will be prompted for a file name under which your work will be saved.
To add a beam to your project, click on the Add Beam icon or select the Project, Add Beam option. The beam edit dialog, shown next, will be displayed.
The dialog is arranged as a multi-page notebook. Clicking on the 'Apply' button commits any changes that you make without closing the dialog, and you see the updated calculations in the corresponding window. 'Undo' restores the data to what it was before you started editing or last pressed 'Apply'.
On the first page you enter something to identify the beam, the span, the beam type, whether you want to print one or both diagrams (ignored in the demo version) and you then enter the loads on the beam in the table below.
The column headed 'T' defines the load type: 'U' for a load which is uniformly distributed between the beam reactions; 'R' for a part UDL - you enter the loading and start and end positions (measured in metres from R1); 'V' for a variable or triangular load - you enter the start load and position and end load and position (each in kN/m run and m. from R1); and, lastly, 'P' for a point load, entered in kN, position in m. from R1. The load duration is entered in the second column: valid options are shown in the panel below the grid when the cursor is in this column. In the third 'Desc' column enter something to identify the load and then enter the load(s) and start/end positions as appropriate. When you have entered the loads click on 'Apply'. The calculation window will be updated.
If the beam is a steel beam, click on the Steel tab and you will see a display like the one below. Make any changes, then 'Apply' again. The required size will be shown on the button immediately under 'Consider' (see below) - you can click on the button to manually choose an alternative section, if you don't want the one that the program has selected. Then click on the 'Bearings' tab and change the bearing details as necessary. Click once more on 'Apply' then close the dialog and you're done.
Timber beam design is handled in a similar way, but of course the options are different. If you enter the beam width and depth, that size will be checked. Enter '?' for either and the required dimension will be calculated. The last page of the dialog lets you enter timber beam bearing details, as for steel beams.
For reinforced concrete beams, you need to enter the beam width and height and the depth to the reinforcement. EuroBeam will either calculate the reinforcement required or check the reinforcement if entered.
Steel column design and checking
If you've grasped how beam design is tackled, you will have no problems with steel columns and timber posts and studs - the concepts are identical.
EuroBeam's steel column design dialog has three pages, one each for loads, steel design parameters and base plate sizing. For loads that have positions of '1'-'4', EuroBeam automatically calculates the moment resulting from the applied load.
Timber posts and studs
This dialog shows lets you enter the loading and design criteria for timber posts and studs. These can be axially loaded only or axially loaded and subject to bending to about the major axis. Loads are entered on the first page, the timber species and other design criteria on the second.
Uninstall via Control Panel, Add/Remove Programs. You do not need to uninstall the demo before installing the full version.
Ordering the full version
The full version of EuroBeam lets you print out your calculations and, of course, the on-screen windows do not have the 'Demo' stamp across them. It comes with a printed manual and the price includes updates issued during the next 12 months.
Single user copy £250.00 + VAT (£300.00) BUY NOW
Additional user licence and manual £125.00 + VAT (£150.00)
Unlimited user site licence £750.00 + VAT (£900.00)
If you're already a registered user of SuperBeam or ProSteel, EuroBeam costs £150; if you have bought both the cost is just £100 (single user licence prices exc. VAT). If you buy EuroBeam first, you will be able to buy either or both of these at reduced prices. Full price list
How to buy:
BUY NOW: Order from our website and you won't have to wait: once your secure credit card payment has been processed you'll be emailed a link so you can download the full version. A printed manual will be sent on to you shortly. Web sales are handled for us by BlueSnap Inc through their secured servers
Mail orders are handled directly by Online50 Limited. Purchase orders are accepted from quoted plc and public sector purchasers only. All other orders must be accompanied by a cheque or prepaid using internet banking. Printable order form
All our programs run on Windows Vista and Windows 7/8/10 systems. Windows XP and Vista are no longer supported.